Welcome, Guest
YaBB - Yet another Bulletin Board
  Enjoy vour visit to the American Killifish Association FORUMs...

   To be able to post in our FORUMs, you must be an AKA member... Please Join the AKA!
  HomeHelpSearchReturn to AKA Homepage  
 
Page Index Toggle Pages: 1
Send Topic Print
Rivulus (cynodonichthys) sp. Kuna_Yala_Pan 2009-29 (Read 451 times)
Patrick Sabourin
Junior Member
**
Offline



Posts: 6
Rivulus (cynodonichthys) sp. Kuna_Yala_Pan 2009-29
Oct 23rd, 2019 at 12:37pm
 
Response to my questions about Rivulus (cynodichthys) sp. Kura_Yala_PAN 2009-29 purch from Ken Normandin. 
"The sp. Kuna Yala are a “new” species in the R. brunneus group that I (With Andre Schonewille, John and Katy Boylan) first collected in 2009 in Panama and re-collected them again in 2012.  Since they were collected at the same location in different years, I stuck with the original site designation.  They were collected in a clear, small mountain stream along the margins in leaf litter and plant roots, as well as in a muddy, seepage outflow from that same stream in very shallow (sometimes as low as an inch or less) water.  They do have a name pending, but I can’t give it out until my paper to describe them is published.
Their maximum size is about 3”, nose to tail, so I think your pair is about 2/3 full size.  For me, they are relatively easy to keep and breed, they’ll eat just about anything, including a good flake food.  My normal feeding routine rotates between grindal worms, midge fly larvae, bbs and flake food. In a well planted tank they will reproduce easily and for the most part leave the fry alone in the tank if well fed.  They breed in a manner consistent with most of the “Cynodonichthys” type Rivulus.  I don’t monitor water parameters here, but when I collected them, the pH was around 7 and hardness was at 70ppm.  I do use primarily rain water and treated well water here, so I would guess my hardness is pretty close to yours (mine is 120-140 ppm).
If you decide to try to pick eggs, they are a mop spawner and will lay eggs at all areas of the mop.  Eggs are a little sensitive to handling and if not careful, they can fungus up quite easily.  When I collected eggs (many years ago, it seems), I kept them on a damp piece of quilt batting soaked with acriflavine/water solution and I believe they took about 3 weeks to hatch."  To be Contd.
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print